
MS Østerbris: 99.1 % of the water out of the hydraulic oil in a single pass
The hydraulic oil in the main HPU of the fishing vessel MS Østerbris contained 4,909 ppm water and heavy fibre and particle contamination. At start-up the unit removed 99.1 % of the water in a single pass, and at follow-up the reservoir was down to 87 ppm water and cleanliness code 15/13/10.
Water in the reservoir (ppm)
MS Østerbris is a fishing vessel based in Bergen. Its main HPU holds 4,000 litres of hydraulic oil and supplies the winches, cranes and fish pumps. If it fails, the deck stops.
The first sample showed 4,909 ppm water in the oil and a heavy deposit of fibres and particles on the membrane patch. The cleanliness code was ISO 19/19/17.
A DX1002T unit was fitted to the HPU in a kidney loop. At start-up, samples were taken just before and just after the unit: the oil went in with 4,909 ppm water and came out with 43 ppm. That is 99.1 % of the water removed in a single pass.
The reservoir samples from 29 January and 27 March 2021 were assessed by membrane patch, water measurement and cleanliness code. At follow-up, water in the whole reservoir was down to 87 ppm, 98.2 % lower than at the start, and the cleanliness code had improved from 19/19/17 to 15/13/10. The patch from the treated oil was visibly cleaner than the one from the untreated oil.
The figures before and after
| Measurement | Before | After |
|---|---|---|
| Water in the reservoir (ppm) | 4,909 | 87 |
| ISO 4406 cleanliness code | 19/19/17 | 15/13/10 |
| Water at start-up, into and out of the unit (ppm) | 4,909 | 43 |
| Membrane patch test | heavy deposit of fibres and particles | visibly cleaner |
Read the full case study
The rest of the case study, with every before and after measurement, opens once you have entered your work email and company. You only need to do this once; then every case study on the site is open.
We only use the details to see which companies are reading. You will not receive newsletters, and we will not call you.